Deskripsi

FLOW METER FILL RITE MODEL 807CMK

Fill Rite Flow Meters Series 800C Model 807CMK (3/4 Inch) – 3 Wheel Mechanical – 3/4 In Meter, Fill RIte 3/4 Inch

Installation :

• Fill Rite Flow Meters Series 800C Model 807CMK (3/4 INCH) Meters are furnished for horizontal piping, left to right flow,unless otherwise specified. Use oil and gasoline resistantpipe compound on all threaded joints. Flow ports can belocated in any of four positions for horizontal or vertical piping.
• If fluid flow is left to right, install meter.
• If fluid flow is other than left to right, determine direction of fluidflow.
• Lay meter dial face down on a clean flat surface.
• Arrow mark on meter housing indicates fluid flow direction.
• Remove four screws (item 20).
• Lift meter housing (item 19) and chamber assembly (item26) and rotate together to desired flow direction.
  CAUTION: Chamber opening must face towards inlet port ofmeter.
• Replace four screws (item 20).
• Install meter.

Fluid Compatibility For Flow Meter Fill Rite Model 807CMK :

The 800C is compatible with the following fluids:

• Diesel Fuel, Gasoline, Kerosene, Mineral Spirits,Heptane, and Hexane

The 800C is NOT compatible with the following fluids:

• Bleach, Hydrochloric Acid, Ink, Sulfuric Acid, and Salt Water

If in doubt about compatibility of a specific fluid, contact supplierof fluid to check for any adverse reactions to the following wetted materials.

Model: FILL RITE Flow Meters Series 800C Model 807CMK (3/4 INCH)