HACH – CLF10 sc Free Chlorine Analyzer with SC200 Controller and Combination pH Sensor

Specifications :

  • Accuracy: Free Chlorine: ± 3 % of the reference test** (DPD) at constant pH less than 7.2 (±0.2 pH unit)
  • Accuracy 2: Free Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
  • Accuracy 3: Total Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
  • Accuracy 4: Total Chlorine: ± 20 % of the reference test** (DPD) at stable pH greater than 8.5
  • Cable Connection: 5 pin, M12 connector
  • Cable Length: 1 m (between gateway and sc controller)
  • Calibration Method: 1-point or 2-point (zero and slope) calibration
  • Certifications: CE compliant for conducted and radiated emissions:
    – CISPR 11 (Class A limits)
    – EMC Immunity EN 61326-1 (Industrial limits)
    Additional certifications when connected to an sc controller
  • Connection Drain Line: pH Flow Cell Outlet: 1/2-inch ID
  • Connections: 1/4 inch OD
  • Controller: Dual Digital
Kategori: Tag: ,

Deskripsi

HACH – CLF10 sc Free Chlorine Analyzer with SC200 Controller and Combination pH Sensor

The CLF10 sc Free Chlorine Analyzer and CLT10 sc Total Chlorine Analyzer measure free or total chlorine continuously for real time process control. It is based on amperometric technology and is fully compatible with all of Hach’s digital controllers. The CLF10 sc can be used in most municipal and industrial applications, and is best utilized where waste stream management is a constraint.

  • EPA-approved Free or Total Chlorine Analysis
  • No Reagents to Replace, No Waste Stream
  • Chlorine Analysis Made Easy

Produk Terkait

Product Categories