HACH – CA610 Fluoride Analyzer with Reagents

Specifications :

  • Accuracy: ± 10 % or ±0.10 mg/L whichever is greater
  • Air Purge: 0.1 cfm at 20 psig
  • Alarm: Two alarms, selectable for sample concentration, system warning or system shutdown. Each alarm equipped with an SPDT relay with contacts rated for 5 A resisitive load at 230 Vac.
  • Calibration Method: 5.0 mg/L fluoride standards
  • Compliance Certifications: CE approved, ETL listed to UL 1262, ETL certified to CSA 22.2 No. 142
  • Cycle Time: 4.2 min
  • Dimensions (H x W x D): 34.3 mm x 41.9 mm x 19.1 mm
  • Display: LCD, 3 to 1/2 -digit measurement readout and six-character alphanumeric scrolling
    text line
  • Drain Fitting: 1/2-inch ID flexible hose
  • Inlet: 1/4-inch OD polyethylene tubing, quick-disconnect fitting
  • Inlet Pressure: 1 to 10 psig (use sample restriction device
    to reduce higher pressure samples)
  • Lower Limit of Detection (LOD): 0.10 mg/L 0.10 ppm
Kategori: Tag:

Deskripsi

HACH – CA610 Fluoride Analyzer with Reagents

  • Elektroda selektif ion yang dipatenkan, dengan tip yang dapat diganti. Kalibrasi otomatis. Suhu terkontrol. Rugged. Penggunaan reagent sangat rendah. Tahan terhadap perubahan/gangguan.

Product Categories