FLOW METER FILL RITE
Fill Rite Flow Meters Series 800 – 3 Wheel Mechanical Meter (Nickel – for use with Non-potable Water)
Fill Rite Flow Meters Series 900 – 4 Wheel Mechanical Meter (Diesel Fuel, Gasoline, Kerosene, Mineral Spirits,Heptane, and Hexane)
Installation Flow Meter Fill Rite :
FILL RITE Flow Meters Series Meters are furnished for horizontal piping, left to right flow, unless otherwise specified. Use oil and gasoline resistant pipe compound on all threaded joints. Flow ports can be located in any of four positions for horizontal or vertical piping.
- If fluid flow is left to right, install meter.
- If fluid flow is other than left to right, determine direction of fluidflow.
- Lay meter dial face down on a clean flat surface.
- Arrow mark on meter housing indicates fluid flow direction.
- Remove four screws (item 20).
- Lift meter housing (item 19) and chamber assembly (item26) and rotate together to desired flow direction.
CAUTION: Chamber opening must face towards inlet port ofmeter. - Replace four screws (item 20).
- Install meter.
Fluid Compatibility :
The 800C is compatible with the following fluids:
- Diesel Fuel, Gasoline, Kerosene, Mineral Spirits,Heptane, and Hexane
The 800C is NOT compatible with the following fluids:
- Bleach, Hydrochloric Acid, Ink, Sulfuric Acid, and Salt Water
If in doubt about compatibility of a specific fluid, contact supplierof fluid to check for any adverse reactions to the following wetted materials.
Model: FILL RITE Flow Meters Series 800
- The 807CLN1 Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents heptane and non-potable water.
- Fill-Rite meters provide precision and durability in a cost-effective design.
- The 807CLN1 is a 3-wheel mechanical liter meter, nickel coated, designed for transfer pumps with a flow rate of 19 to 76 LPM.
- This meter has a 3/4 in. inlet and outlet.
Model: Flow Meter Fill Rite Series 900
- The 901CL Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane.
- Fill-Rite meters provide precision and durability in a cost-effective design.
- The 901CL meter is a 4 wheel mechanical meter designed for transfer pumps with a flow rate of 23 to 151 LPM. this meter has a 1 inlet and outlet.
Features & Benefits Flow Meter Fill Rite :
- +/- 1% Accuracy
- UL/cUL, CE Listed
- 19-76 LPM
- 50 PSI
- 1 in. inlet, 1 in. outlet
- Large Easy to Read Display
- NPT threads
- Nickel plated to handle non-potable water
DOWNLOAD : FILL-RITE-FLOW-METER-Fix
DOWNLOAD : Manual Instruction FILL-RITE-FLOW-METER
Keandalan / Kelebihan Flow Meter Fill Rite Series di bandingkan dengan product lain :
- 100% produk bisa dikalibrasi.
- Hasil tes kalibrasi dapat dikirim untuk setiap meter ke pelanggan.
- Kelas B (ISO) menampilkan performa luar biasa.
- Disesuaikan dengan kondisi penggunaan di lingkungan yang sulit.
Utatip Metertek Duas
Kami berlokasi di Jakarta, Indonesia. Kami adalah Distributor-Agent-Pemasok/Supllier/Importir pengukur aliran (Flow Meter) yang dikelola secara profesional. Produk kami banyak digunakan di berbagai bidang, termasuk kelistrikan, industri kimia, minyak dan gas, tekstil, pemeliharaan air, perlindungan lingkungan, dll.
Selain impor dan memasok produk, kami juga menjual produk langsung ke konsumen. Konsumen kami bervariasi, mulai dari pedagang eceran, pedagang grosir, ataupun perusahaan besar, hingga instansi pemerintahan.
Kami menyediakan solusi pengukur aliran (Flow Meter) yang lengkap dengan berteknologi tinggi dan berkualitas tinggi dari berbagai brand.
Pelayanan Kalibrasi Flow Meter/ Water Meter :
Jasa Kalibrasi, Jasa Tera, Jasa Tera Ulang, Untuk Pengujian Flowmeter (Sertifikat Metrology) ;
- Water Meter,
- Oil Meter,
- Gas Meter,
- Listrik Meter &
- Timbangan.